Privacy Policy

Moxie Prox collects nothing. This is the same text the app shows under Help › Privacy Policy.

Last updated 15 November 2026

In short

Moxie Prox runs on your Mac or Windows PC and talks only to the Proxmox VE servers and server-management (BMC) interfaces you add (and, if you sign in with OpenID on a Mac, the identity provider they use; while you look at Lists › Clusters › Map on a Mac, Apple's map service). Copies bought from the App Store also ask Apple's App Store, through macOS, to confirm the copy was obtained there; that check is between your Mac and Apple, under Apple's privacy policy, and StoneFrog receives nothing from it. StoneFrog, the developer, collects no data from the app: there are no accounts, analytics, advertising, tracking or crash-reporting services in it.

What the app keeps on your Mac, and why

Cluster profiles: the name you give a cluster, its address and port, the user or API token ID, and the fingerprint of a server certificate you chose to trust. They are stored in the app's container, in a file only your user account can read, so the app can reconnect.

API token secrets: stored in your Mac's Keychain when you add a cluster, because the app needs them to connect.

Passwords: stored in your Mac's Keychain only if you type one into a cluster's settings, or leave "Remember in Keychain" on when you sign in. Otherwise you are asked each time.

Server-management connections (a server's BMC, such as an iLO or iDRAC): the name you give one, its address and port, the user name and the fingerprint of a certificate you chose to trust, in a file only your user account can read; its password in your Mac's Keychain only if you leave "Remember in Keychain" on (otherwise you are asked again after the app restarts); and the sensor readings the app records for its charts, the last 7 days of them.

Sign-in tickets and two-factor codes are kept in memory only, never written to disk. The one exception is a SPICE console's one-time password: the app hands it to your SPICE viewer in a file only your user account can read. The password stops working within a minute, and the app deletes the file shortly afterwards; if you quit the app before then, it deletes the file the next time it starts.

Preferences, such as appearance and panel sizes.

Guest details: the details the app last read for each guest (its configuration without its notes or cloud-init password, disk space, network addresses, DNS name, operating system and snapshot times), in a file per cluster that only your user account can read, so lists can show them at once the next time you open the app. They are replaced as the app reads each guest again. Details more than 30 days old are no longer shown, and are removed the next time the app saves that file.

Firewall history: before every firewall change it makes, when it connects, and when it finds a change made elsewhere, the app keeps a copy of the cluster's firewall configuration (options, rules, security groups, aliases and IP sets, with the comments written in them), and a log of the firewall changes it made (who was signed in, when, on which computer, and what changed). They are kept in a folder per cluster that only your user account can read, until they are older than the time set in Settings › Firewall (90 days unless you change it) or need more room than that setting allows.

If you choose a folder for firewall history in Settings › Firewall, the app also copies those backups and that log into it, encrypted (AES-256-GCM) with a key kept in your Mac's Keychain and never written to the folder; the folder and file names show the computer's and the cluster's names and the backups' dates. Without the key nobody can read the copies, StoneFrog included. Show Key… lets you copy the key to open the copies on another computer.

Settings backup, only if you turn it on in Settings › Privacy & About (it is off until you do): the app keeps a copy of its settings in a folder you choose, so you can restore them here or on another computer. It holds your cluster profiles and server-management connections without their passwords or token secrets, cluster groups, Smart Folders, saved reports, alert rules and preferences. It is encrypted (AES-256-GCM) with a key made from a passphrase you choose (PBKDF2-HMAC-SHA256); your Mac's Keychain keeps that key to write later backups, never the passphrase, and the file's name shows the computer's name. Without the passphrase nobody can read the file, StoneFrog included.

Console recordings, only while you have Record switched on in a console window: plain-text files that only your user account can read.

Crash reports: if the app quits unexpectedly, it keeps a report on your Mac so the problem can be found: the error and where in the app it happened, a short trail of the screens and actions just before (object types and IDs, never names, addresses, passwords or server messages), and any diagnostics macOS hands the app. The ten newest crash reports (and ten of other diagnostics, such as hangs) are kept, none older than 90 days. The app sends none of these reports: Help › Copy Crash Report… shows a report and copies it only when you click Copy Report.

A log of what the app did and any errors, including the names and addresses of your servers and the IDs of guests, but never passwords, tokens or text you typed. It goes to macOS's own system log, which macOS keeps and removes on its own schedule and which you can read in the Console app. The app sends none of it.

What leaves your Mac

What you do in the app (signing in, viewing inventory, operations, console input) is sent directly from your Mac to the Proxmox servers and server-management interfaces you add, over encrypted connections. Those servers are yours or your organisation's; their own policies apply.

If you sign in with OpenID, the sign-in page of the identity provider your Proxmox server uses opens in a browser window; that provider's own policy applies.

A folder you choose for firewall history or for the settings backup may be on another drive, a network share or one a cloud service syncs (iCloud Drive, OneDrive, Dropbox). The app only writes the encrypted files there; macOS and that service move them, under the service's own terms.

Lists › Clusters › Map on a Mac draws the locations set on your Proxmox servers on Apple's map (MapKit): while it shows, macOS's own map service asks Apple's map servers for the map of the area in view, under Apple's privacy policy, and StoneFrog receives nothing from it. The Windows app draws its map from outlines it carries and asks no map service.

Apart from those servers and the map, the app itself sends nothing: not to StoneFrog, and not to any other third party. Links to moxieprox.com and StoneFrog.com open in your web browser, where those websites' own privacy notices apply.

Help › Request a Feature… shows you an email to StoneFrog with your idea, how you would use it if you say, and the app and macOS versions. Open in Mail hands that email to your mail app, where your mail provider's own policy applies (some providers save drafts on their servers). The app itself sends nothing: StoneFrog receives it only if you send it.

If you email StoneFrog, with a feature request or a question, StoneFrog uses your email only to answer you and to improve the app, keeps it no longer than that needs, and deletes it when you ask at support@moxieprox.com.

If you have chosen in macOS to share analytics with app developers, Apple may give StoneFrog anonymous crash reports; you can turn this off in System Settings › Privacy & Security › Analytics & Improvements.

How long it is kept, and how to delete it

The cluster profiles, server-management connections and their readings (the last 7 days), secrets, passwords, preferences, guest details, firewall history and console recordings described above stay on your Mac until you delete them (guest details go with their cluster, or after 30 days as described above; firewall history goes with its cluster, or as set in Settings › Firewall; its encrypted copies in a folder you chose follow the history in the app while the folder is chosen, and otherwise stay there until you delete them, which Settings › Firewall offers when you stop copying or choose another folder; the settings backup is written again as your settings change and stays in its folder until you delete it, which Settings offers when you turn the backup off). Crash reports are trimmed each time the app starts: it keeps the ten newest (and ten of other diagnostics) and removes the rest and any older than 90 days. A SPICE console's password file is deleted as described above, and sign-in tickets and two-factor codes are gone when the app quits. While a file is uploaded or downloaded, or console text is saved, the app works on a temporary copy that it deletes when it is done. An email you send StoneFrog is kept as described under What leaves your Mac.

To remove a cluster with its saved password or token secret, its guest details and its firewall history, remove it in Settings › Connections. To remove a server-management connection with its saved password and its readings, choose Actions › Remove… on its page. To remove every saved cluster and server-management connection with their saved passwords and token secrets at once, including from your Mac's Keychain, together with the key of any encrypted firewall history copies (copies in a folder you chose can't be opened without it) and the settings backup's key (the backup still opens with its passphrase), use Settings › Privacy & About › Remove All Clusters and Saved Credentials. Console recordings can be deleted in the Finder: open a console window and click Show Recordings. Crash reports can be deleted the same way: choose Help › Copy Crash Report… and click Show in Finder.

To remove everything, remove each cluster and server-management connection, quit the app, then delete the app and its folder ~/Library/Containers/com.stonefrog.moxieprox.

Moxie Prox for Windows

The sections above describe the Mac app. The Windows app follows the same policy: it talks only to the Proxmox VE servers and server-management (BMC) interfaces you add, and it sends nothing to StoneFrog. This is where it differs.

Where it keeps things: everything stays in your Windows user profile on that PC. Cluster profiles, server-management connections and their readings (the last 7 days), cluster groups, guest details, firewall history (backups and the log of firewall changes made through the app, kept as set in Settings › Firewall) and the report archive are in the folder %LOCALAPPDATA%\Moxie Prox. If you choose a folder for firewall history in Settings › Firewall, the app also copies them there, encrypted with a key kept in Credential Manager, as on the Mac. The settings backup, if you turn it on in Settings, works as on the Mac, its passphrase's key kept in Credential Manager. Preferences, layout, Smart Folders and saved reports are in the file %LOCALAPPDATA%\MoxieProx.exe.plist.

Secrets: API token secrets and passwords are stored in Windows Credential Manager, for your user account on that PC only (they don't roam to other PCs), and Windows encrypts them for your account: a token secret or password when you add a cluster with one, a password when you leave "Remember in Credential Manager" on as you sign in, and a server-management password when you leave its "Remember in Credential Manager" on. Sign-in tickets are kept in memory only.

Files other users of the PC can't read: the saved connections and cluster groups, the readings, guest details (removed after 30 days), firewall history, console recordings (only while Record is on), the report archive (at most 200 MB), the log, and a SPICE console's one-time password file are protected so that only your user account can read them (an administrator of the PC can still take them over). The app deletes the SPICE file 30 seconds after your SPICE viewer opens it, and its password stops working within a minute. The preferences file keeps Windows' usual permissions for your profile.

A diagnostic log instead of crash reports: the Windows app keeps no crash reports. It keeps a log in %LOCALAPPDATA%\Moxie Prox\Logs: what the app did and any errors, including the names and addresses of your servers and the IDs of guests, but never passwords, tokens or text you typed. It keeps at most two files of 4 MB each, replacing the older as it grows. The app sends none of it.

What leaves your PC: signing in and everything you do in the app (your user name, password or token secret, and what you view and change) goes directly to the Proxmox servers and server-management interfaces you add, always over encrypted (TLS) connections; a server whose certificate Windows doesn't trust is used only after you check and accept its fingerprint. Links open in your web browser. Help › Request a Feature… shows you an email (with the app version and the Windows version) that your mail app sends only if you send it; if you do, StoneFrog receives it and handles it as described above for emails to StoneFrog. Sign-in with OpenID isn't available on Windows yet.

Crash reports through Microsoft: if you installed the app from the Microsoft Store and have chosen in Windows to send optional diagnostic data, Microsoft may give StoneFrog reports of the app crashing or stopping responding (where in the app it happened, the app version, and the Windows version and type of device) through its developer dashboard. You can turn this off in Settings › Privacy & security › Diagnostics & feedback. The app itself adds nothing to these reports.

Deleting it: to remove a cluster with its saved password or token secret, its guest details and its firewall history, remove it in Settings › Connections; to remove a server-management (BMC) connection with its saved password, use Remove… on its Summary. To remove every saved cluster and server-management connection with their saved passwords and token secrets at once, together with the key of any encrypted firewall history copies (copies in a folder you chose can't be opened without it) and the settings backup's key (the backup still opens with its passphrase), use Settings › Your data › Remove All Clusters and Saved Credentials. Uninstalling the app removes its folder, but not its entries in Credential Manager: use Remove All first, or remove the entries whose names begin "com.stonefrog.moxieprox/" in Credential Manager (Control Panel › Credential Manager › Windows Credentials). To remove everything else too, quit the app, delete the folder %LOCALAPPDATA%\Moxie Prox and the file %LOCALAPPDATA%\MoxieProx.exe.plist, then uninstall the app.

Your choices

Because the app collects nothing, there is no consent to withdraw from StoneFrog. If you have emailed StoneFrog, you can ask at support@moxieprox.com for your email to be deleted. You can withdraw the app's access to your local network at any time in System Settings › Privacy & Security › Local Network.

Children

The app is a tool for administering servers and is not directed at children.

Changes and contact

If this policy changes, the new version ships with an app update. Questions: support@moxieprox.com.

This policy covers the app. How this website counts visits is under Privacy and security › This website.